Specifications
📘 MultiTech MTCAP-LAP3-915-001 – Technical Documentation
1. 🔍 Model Overview
The MultiConnect® Conduit™ AP MTCAP-LAP3-915-001 is an indoor LoRaWAN® Access Point designed for private LoRaWAN networks. It supports LTE connectivity with SIM card integration, enabling reliable backhaul for gateway-to-cloud communication.
2. ⚙️ Technical Specifications
Model
MTCAP-LAP3-915-001
Processor
ARM926EJ-S
Memory
256 MB RAM, 256 MB Flash
Cellular
LTE Cat 4 (with micro SIM card support)
LoRaWAN Compatibility
LoRaWAN 1.0.2
Frequency Band
915 MHz (North America)
Backhaul Connectivity
LTE and Ethernet
Power Supply
5V DC (via supplied AC adapter)
Antenna Connections
SMA connectors (LoRa and LTE)
Operating Temperature
0°C to +70°C
Certifications
FCC, IC, Carrier Pre-Certified
3. 📦 Included Hardware
MTCAP-LAP3 gateway unit
LTE antenna (SMA)
LoRa antenna (SMA)
Micro SIM slot
Power adapter (5V DC)
Mounting hardware (optional)
4. 🔧 Setup Instructions
SIM Card Installation
Ensure power is OFF.
Insert a micro (3FF) SIM card into the SIM slot.
Power on the device to enable cellular backhaul.
Connecting Antennas
Attach LoRa antenna to the LoRa SMA port.
Attach LTE antenna to the Cellular SMA port.
Ethernet and Power
Connect to Ethernet if required (RJ45 port).
Power using the 5V adapter.
5. 🖥️ Configuration and Management
Web UI Access (mPower firmware)
Connect to the device via Ethernet.
Navigate to:
http://192.168.2.1Login with default credentials (admin/admin) or your assigned credentials.
Configure:
LoRaWAN packet forwarder
Network (LTE/Ethernet fallback)
System time and diagnostics
6. 📑 Documentation & Resources
📘 User Guide (PDF): MTCAP-LAP3 User Manual
🛠️ Developer Portal: MultiTech Developer Hub – MTCAP
⚙️ mPower Software Configuration Guide: mPower Manual (PDF)
7. 📬 Support
MultiTech Support Center: support.multitech.com
Email: [email protected]
Warranty Info: Warranty Policy
Last updated
Was this helpful?